幸运飞艇注册投注

歡迎訪問特種泵閥官方網站,主要產品包括齒輪泵、齒輪油泵、螺桿泵等系列
服務熱線
15720366306
當前位置: 主頁 > 產品中心 >

不銹鋼齒輪泵

本系列齒輪泵主要由齒輪、軸、泵體、安全閥、軸端密封等。齒輪熱處理后具有較高的硬度和強度,與軸一起安裝在可替換的袖子。所有的部件泵會自動達到潤滑泵工作時傳輸介質。有設計恰當的卸荷槽,在泵回油槽,使齒輪承擔至少扭力因此減少軸承的載荷和磨損,提高泵的效率。泵安
訂購熱線:0317-8026285
1.FCB series stainless steel gear pump brief introduction
   This series pump is suitable for transferring not-contain solid particles and fibers,corrosive high temperature liquid, temperature below 120°C,viscosity 5~1500cst lubricating oil or other liquid similar to lubricating oil.

2. FCB series stainless steel pump application
This series pump are used in health conditions demand higher occasion, such as Pharmaceutical ,food industries ; Also used in weak corrosive circumstances, such as fine chemical ,cosmetic, dyeing ,brewing and other industries.

3. FCB series stainless steel pump structure characteristics
This series gear pump are mainly composed by gear, shaft, pump body, safety valve, shaft end seal etc. Gear after heat treatment have higher hardness and strength, and together with the shaft installed in the replaceable sleeve to operate. All the parts in the pump will automatic reach lubrication by transferring medium when pump working.There are properly designed unloading groove and return chute in pump, which makes the gear bear the least torque force and therefor reduce the load of bearings and wear, pump’s efficiency raised.Pump have safety valve as protection of overload. safety valve’s return flow pressure is 1.5 times higher than pump’s rated exhaust pressure. Also can adjust within the allowance according to actual requirement. But please note the safety valve can not be used as pressure reducing valve working for long time. Can separately install pressure reducing valve if it is needed.
 
1。FCB系列不銹鋼齒輪泵簡介
本系列泵適用于轉移不含固體顆粒和纖維,腐蝕性高溫液體,溫度低于120°C,粘度5 ~ 1500 cst潤滑油或其他液體類似于潤滑油。

2。FCB系列不銹鋼齒輪泵的應用程序
本系列泵是用于衛生條件要求更高的場合,如制藥、食品等行業;也用于弱腐蝕性環境下,如精細化工、化妝品、印染、釀造等行業。

3.FCB系列不銹鋼齒輪泵的結構特點
本系列齒輪泵主要由齒輪、軸、泵體、安全閥、軸端密封等。齒輪熱處理后具有較高的硬度和強度,與軸一起安裝在可替換的袖子。所有的部件泵會自動達到潤滑泵工作時傳輸介質。有設計恰當的卸荷槽,在泵回油槽,使齒輪承擔至少扭力因此減少軸承的載荷和磨損,提高泵的效率。泵安全閥過載保護。安全閥的回流壓力高于泵的額定排氣壓力的1.5倍。內也可以調整津貼根據實際需求。但請注意安全閥不能用作減壓閥為長時間工作。可以單獨安裝減壓閥如果它是必要的。
 參考價格美金300-5000元
 
 
model Capacity Q Speed r/min Pressure MPa NPSH
 m
Efficiency % motor
m3/h   1/min  Power KW model  
FCB-18.3 1.1 18.3 1400 1.45 5 44 1.5 Y90L-4  
2CY-1.1/1.45B  
FCB-33.3 2 33.3 1420 1.45 5 44 2.2 Y100L1-4  
2CY-2/1.45B  
FCB-55 3.3 55 1400 0.33 7 41 1.5 Y90L-4  
2CY-3.3/0.33B  
FCB-83.3 5 83.3 1420 0.33 7 43 2.2 Y100L1-4  
2CY-5/0.33B  
FCB-135 8 135 940 0.33 5 46 2.2 Y112M-6  
2CY-8/0.33B  
FCB-200 12 200 1440 0.33 5 46 4 Y112-4  
2CY-12/0.33B  
FCB-300 18 300 960 0.36 5 42 5.5 Y132M-6  
2CY-18/0.36B  
FCB-483.3 29 483.3 1440 0.36 5.5 42 7.5 Y132M2-4  
2CY-29/0.36B 11 Y160M-4  
FCB-633 38 633 970 0.28 6 43 11 Y160L-6  
2CY-38/0.28  
FCB-960 58 960 1470 0.28 6.5 43 18.5 Y180M-4  
2CY-58/0.28 22 Y180L-4  
FCB-1200 72 1200 740 0.6 7 42 37 Y280S-8  
FCB-1600 95 1600 980 45 Y280S-6  
FCB-1800 110 1800 740 0.6 7.5 43 55 Y315S-8  
FCB-2500 150 2500 980 75 Y315S-6  
FCB-2850 170 2850 740 0.6 8 44 90 Y315M2-8  
FCB-3800 230 3800 985 110 Y315M2-6  
FCB-4100 245 4100 740 0.6 8 44 90 Y315M2-8  
FCB-5400 325 5400 985 110 Y315M2-6  
 
 
model Capacity Q Speed r/min Pressure MPa NPSH
m
Efficiency % motor
m3/h   1/min  Power KW model  
FCB-3/1.0   3 960 1.0 7 44 0.75 Y90S-6  
   
FCB-4/1.0   4 1500 1.0 7 44 0.75 Y80M2-4  
   
FCB-5/1.0   5 1500 0.33 7 41 0.75 Y80M2-4  
   
FCB-6/1.0   6 1500 0.33 7 43 2.2 Y80M2-4  
   
FCB-7/1.0   7 1500 0.33 7 46 20.75 Y80M2-4  
   
   
   
 
 

相關資訊

聯系我們

泊頭市特種泵閥有限公司

幸运飞艇注册投注手機:15720366306

E-mail:KLH@btsbc.com

地址:河北省泊頭市南倉街